2026.11.18

การทำลาย SSD ในกรุงเทพฯ: ทำไม Solid-State Drives จึงต้องมีวิธีจัดการต่างจากฮาร์ดดิสก์

ทำไม SSD ถึงต้องมีวิธีจัดการต่างจากฮาร์ดดิสก์: การเกลี่ยความสึกหรอและพื้นที่สำรอง, ทำไมการล้างสนามแม่เหล็กจึงไม่ได้ผล, การล้างข้อมูลก่อน, ขนาดชิ้นส่วนสำหรับการทำลาย, M.2 ที่ซ่อนอยู่และหน่วยความจำที่บัดกรี, และรายการตรวจสอบในใบรับรอง

อ่านภาษาไทย

If you are looking for an SSD destruction service in Bangkok, you have probably noticed that most of the advice online was written for spinning hard disks. Solid-state drives store data in a completely different way, and several habits that work on an old hard disk, such as degaussing, overwriting the whole drive or punching a single hole through it, do far less on an SSD than people assume. This guide explains why SSDs need different handling, what "destroyed" should mean for flash storage, where SSDs hide in a typical Thai office, and what your certificate should record when the drives are gone.

ทำไม SSD จึงไม่ใช่แค่ฮาร์ดดิสก์ที่เร็วกว่า

ฮาร์ดดิสก์เขียนข้อมูลลงบนจานแม่เหล็ก และเมื่อคุณเขียนทับเซกเตอร์ ข้อมูลใหม่จะไปอยู่ตำแหน่งทางกายภาพเดียวกับข้อมูลเก่า แต่ SSD ไม่ได้ทำงานแบบนั้น ข้อมูลของมันอยู่ในชิปแฟลช NAND และตัวควบคุม (controller) ภายในไดรฟ์จะคอยตัดสินใจตลอดเวลาว่าข้อมูลแต่ละชิ้นควรอยู่ตรงไหนทางกายภาพ เพื่อกระจายความสึกหรอให้เท่ากัน มันจะเขียนข้อมูลใหม่ไปยังเซลล์ที่ยังใหม่และเก็บเซลล์เก่าไว้อย่างเงียบๆ SSD ส่วนใหญ่ยังมีพื้นที่สำรองที่เรียกว่า over-provisioning ซึ่งคอมพิวเตอร์มองไม่เห็นและเข้าถึงโดยตรงไม่ได้

ผลลัพธ์ในทางปฏิบัติคือ ระบบปฏิบัติการของคุณจะมองเห็นแค่แผนผังของไดรฟ์เท่านั้น ไม่ใช่ตัวไดรฟ์จริงๆ เมื่อซอฟต์แวร์ "เขียนทับทุกเซกเตอร์" ตัวควบคุมอาจจะแค่วิธีเขียนรูปแบบข้อมูลใหม่ไปที่อื่นและปล่อยให้สำเนาเก่าๆ ค้างอยู่ในบล็อกที่ถูกพักการใช้งานหรือบล็อกสำรอง สถาบันมาตรฐานและเทคโนโลยีแห่งชาติของสหรัฐอเมริกา (NIST) ได้ชี้ประเด็นนี้ไว้ในแนวทางปฏิบัติการล้างข้อมูลในสื่อบันทึกข้อมูล NIST SP 800-88 Revision 2 (กันยายน 2025): สำหรับ SSD ที่มี over-provisioning การเขียนทับซ้ำๆ ให้การปกป้องความลับได้น้อยมาก นั่นคือเหตุผลที่เครื่องมือล้างข้อมูลฟรีที่ทีมไอทีหลายทีมใช้กันมาหลายปีจึงไม่ค่อยเหมาะกับแล็ปท็อปและเซิร์ฟเวอร์สมัยใหม่

การล้างสนามแม่เหล็กไม่มีผลใดๆ กับหน่วยความจำแฟลช

Degaussing scrambles magnetic media with a powerful magnetic field. It can be effective on hard disks and tapes, but SSDs, USB sticks, memory cards and phone storage are not magnetic, so a degausser leaves their data untouched. NIST's guideline says plainly that degaussing should not be used for flash storage such as SSDs. If a vendor proposes to "degauss everything" in a batch that includes laptops bought in the last few years, the SSDs in that batch have not been sanitized at all. We compared shredding, crushing and degaussing in more detail in our guide to choosing a hard drive destruction service in Bangkok ; the short version is that SSDs need a method that reaches the chips themselves.

ขั้นตอนแรกสำหรับ SSD ที่ยังใช้งานได้: ล้างข้อมูลก่อนที่มันจะออกจากมือคุณ

หาก SSD ยังใช้งานได้ ขั้นตอนแรกที่ดีที่สุดไม่ใช่การทำลายทางกายภาพ ไดรฟ์ SATA และ NVMe สมัยใหม่มีคำสั่งล้างข้อมูลในตัวที่ออกแบบโดยผู้ผลิตไดรฟ์ ซึ่งจะทำงานกับทุกเซลล์ที่ตัวควบคุมจัดการ รวมถึงพื้นที่สำรองที่ซ่อนอยู่ซึ่งซอฟต์แวร์ทั่วไปเข้าไม่ถึง วิธีที่เร็วที่สุดคือการลบข้อมูลด้วยการเข้ารหัส (cryptographic erase): บนไดรฟ์ที่เข้ารหัสข้อมูลทุกอย่างที่จัดเก็บ การทำลายกุญแจเข้ารหัสภายในจะทำให้ข้อมูลที่เหลืออ่านไม่ได้ในเวลาไม่กี่วินาที NIST อธิบายว่า cryptographic erase เป็นเทคนิคการล้างข้อมูลที่สามารถ sanitize ได้อย่างมีความเชื่อมั่นสูง แต่ต้องทำภายใต้เงื่อนไขที่กำหนดเท่านั้น ซึ่งในทางปฏิบัติหมายความว่าการเข้ารหัสของไดรฟ์เปิดใช้งานอยู่จริงๆ และเครื่องมือที่คุณใช้รายงานว่าสำเร็จ

มีประเด็นสำคัญไม่กี่ข้อในทางปฏิบัติ:

  • Use the drive maker's utility or a recognised sanitize tool , not a file shredder or a quick format. Record the tool name, the result and the drive serial number.
  • Do not assume encryption. If you cannot confirm that BitLocker, FileVault or the drive's own encryption was on from day one, treat the drive as unencrypted.
  • A sanitize that fails or cannot be verified is a reason to destroy , not a reason to try a weaker method.

For drives holding customer, payroll, medical or financial data, many companies do both: sanitize the working drives in-house, then send them for physical destruction anyway. That layered approach costs very little extra and covers you if one step turns out weaker than expected. For laptops, where this step is often skipped, see our article on whether a factory reset is enough for company laptops .

การทำลาย SSD และขนาดของชิ้นส่วน: ทำไมคำว่า "ย่อยทำลาย" จึงมีความหมายต่างกันมาก

เมื่อ SSD เสีย ล็อกอยู่ เข้ารหัสด้วยกุญแจที่หายไป หรือมีความละเอียดอ่อนเกินกว่าจะนำกลับมาใช้ใหม่ การทำลายทางกายภาพคือทางเลือกที่เหลืออยู่ รายละเอียดสำคัญในที่นี้คือขนาดของชิ้นส่วน ชิปแฟลชเดี่ยวมีขนาดเพียงไม่กี่ตารางเซนติเมตร แต่สามารถเก็บข้อมูลจำนวนมากได้ เครื่องย่อยฮาร์ดดิสก์ที่ฉีกจานแม่เหล็กออกเป็นแถบกว้างหลายเซนติเมตรอาจทำให้ SSD ขนาดเล็กหรือแท่ง M.2 ผ่านไปได้โดยที่ชิปแค่ร้าวแต่ไม่แตก และ SSD ที่ถูกบดอาจเหลือชิปที่ยังสมบูรณ์อยู่บนแผงวงจรที่โค้งงอ

มาตรฐานสากลสำหรับการทำลายสื่อบันทึกข้อมูล ISO/IEC 21964 (เดิมคือ DIN 66399 ของเยอรมนี) กำหนดระดับความปลอดภัยแยกต่างหากสำหรับสื่ออิเล็กทรอนิกส์ เช่น SSD, USB แฟลชไดรฟ์ และโทรศัพท์ ระดับ E-3 กำหนดให้ชิ้นส่วนมีขนาดไม่เกิน 160 ตารางมิลลิเมตร, E-4 กำหนดให้ตัวชิปต้องถูกแยกเป็นชิ้นส่วนไม่เกิน 30 ตารางมิลลิเมตร และ E-5 กำหนดให้ชิปต้องแตกออกหลายครั้งเป็นชิ้นส่วนไม่เกิน 10 ตารางมิลลิเมตร สำหรับระดับที่เข้มงวดที่สุด ข้อกำหนดของสำนักงานความมั่นคงแห่งชาติสหรัฐฯ (NSA) สำหรับเครื่องทำลายโซลิดสเตต์ไดรฟ์กำหนดให้เศษชิ้นส่วนมีขอบเขตสูงสุดไม่เกิน 2 มิลลิเมตร

NIST's 2025 revision goes further still: because data density keeps rising, it says shredding and pulverizing should be avoided for anything but the lowest security categories of data, and points to melting or incineration for the highest. Most Thai companies are not handling state secrets, and for ordinary business data a combination of a proper sanitize step and physical destruction of the chips is a sensible, defensible standard. The useful question to ask any vendor, including us, is simple: what happens to the flash chips, and what does the certificate record?

จุดที่ SSD ซ่อนอยูุ่ในสำนักงานในกรุงเทพฯ

การทำลาย SSD ไม่ได้มีแค่ไดรฟ์ขนาด 2.5 นิ้วที่เห็นได้ชัดในกล่อง เมื่อคุณวางแผนเคลียร์ของ ให้มองหาหน่วยความจำแฟลชในสถานที่เหล่านี้:

  • M.2 and NVMe sticks inside laptops, desktops and mini PCs, often no bigger than a stick of chewing gum and easy to miss in a parts bin.
  • Soldered storage in many recent thin laptops and tablets, including Apple silicon MacBooks. The storage cannot be removed, so the choices are a verified built-in erase or destroying the board that carries the chips. Mention these machines when you book so the method is agreed in advance.
  • Servers and storage arrays , which may hold enterprise SSDs in hot-swap bays plus small boot drives on the motherboard. Our server data destruction service covers decommissioned servers.
  • NAS boxes with SSD cache drives , which can hold fragments of recently used files even after the main hard disks are pulled.
  • External SSDs and USB sticks handed out to staff, which rarely appear in any asset register.

Laptops are usually the largest single source. If you would rather send whole machines than pull the drives yourself, our laptop data destruction service handles the storage and leaves the laptop itself intact for donation or recycling.

สิ่งที่ใบรับรองการทำลาย SSD ควรอบันทึกไว้

ใบรับรองคือหลักฐานของคุณภายใต้ พ.ร.บ. คุ้มครองข้อมูลส่วนบุคคล (PDPA) ของประเทศไทย ซึ่งกำหนดให้ผู้ควบคุมข้อมูลต้องมีระบบที่ใช้งานได้จริงในการลบหรือทำลายข้อมูลส่วนบุคคลที่ไม่จำเป็นต้องใช้อิกรอบ สำหรับ SSD ให้ตรวจสอบว่าแต่ละรายการบันทึกข้อมูลต่อไปนี้:

  • The serial number of the drive itself , plus the asset tag or serial of the laptop, desktop or server it came from, so an auditor can trace one to the other.
  • The media type : SATA SSD, M.2/NVMe, soldered storage, USB flash, and so on.
  • The method used, and whether a sanitize step was performed before destruction.
  • The date , and who carried out or witnessed the work.

แนวทางของ NIST แนะนำให้บันทึกข้อมูลให้ละเอียดกว่านั้น รวมถึงผู้ผลิต รุ่น เครื่องมือที่ใช้ และวิธีตรวจสอบผลลัพธ์ คุณไม่จำเป็นต้องมีทุกช่องสำหรับทุกงาน แต่หมายเลขซีเรียล วิธีการ และวันที่คือสิ่งขั้นต่ำที่ทำให้ใบรับรองคุ้มค่าแก่การเก็บรักษา

ขั้นตอนการปลดระวาง SSD ในทางปฏิบัติ

  1. Inventory first. List every drive by serial number and the device it came from before anything leaves the building.
  2. Separate by condition. Working drives go to the sanitize queue; dead, locked or unknown-key drives go straight to destruction.
  3. Sanitize working drives with a proper tool and log the result per serial.
  4. Decide on reuse or destruction. Reuse only drives that sanitized successfully and hold low-risk data; destroy the rest.
  5. Hand over under control , in sealed packaging with a signed handover list.
  6. Match the certificate to your inventory and file it with your PDPA records. For a wider refresh that also covers monitors, docks and cabling, fold the drives into a single IT asset disposal project.

นี่หมายความว่าอย่างไรสำหรับคุณ

SSD ไม่ใช่ฮาร์ดดิสก์ขนาดเล็ก ดังนั้นจึงไม่ควรปลดระวางเหมือนฮาร์ดดิสก์ เครื่องมือเขียนทับและเครื่องล้างสนามแม่เหล็กที่เคยใช้ได้ดีกับดิสก์จานหมุนนั้น แทบจะไม่แตะต้องหน่วยความจำแฟลชเลย และการบดหยาบๆ หรือการย่อยหยาบอาจทำให้ชิ้นส่วนชิปที่อ่านข้อมูลได้ยังคงเหลืออยู่ ล้างข้อมูลไดรฟ์ที่ยังทำงานอยู่ด้วยเครื่องมือที่เหมาะสม ตรวจสอบให้แน่ใจว่าการทำลายทางกายภาพทำให้ชิปแตกจริงๆ ค้นหาแท่ง M.2 และหน่วยความจำที่บัดกรีติดแผงก่อนที่มันจะปะปนหลุดรอดไปกับขยะอิเล็กทรอนิกส์ และเก็บบายรับรองที่ระบุชื่อไดรฟ์ทุกตัวด้วยหมายเลขซีเรียล

Ready to retire a batch of SSDs? Our hard drive and SSD destruction service physically destroys SATA SSDs, M.2 and NVMe drives and hard disks, and issues a Certificate of Destruction for every drive with its serial number, method and date. Ship drives to us from anywhere in Thailand or request a pickup in Bangkok, with office collection available for corporate jobs of 50 devices or more. Get an instant quote or call 082-797-3702.

บทความที่เกี่ยวข้อง

บริการทำลายฮาร์ดไดรฟ์และ SSD กรุงเทพฯ

การทำลายที่ได้รับการรับรอง ปฏิบัติตาม PDPA ในกรุงเทพฯ

Learn More